Thin Green LED Exit Sign - White Housing
Base Code: LEDT-G-W-BB
Items marked FAST SHIP typically ship same day if order is placed before noon
$18.75
A thin, low profile Exit Sign with standard Green LED letters. If you're looking for an exit lighting solution that doesn't take over your decor, this is the sign for you. This sign still meets all the same requirements and listings as a standard unit and can be used almost anywhere! This exit sign operates on 120-277 VAC.
Compatible Battery: BAA-12
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
LED Lighting
This product uses energy efficient and long lasting LED's.
Battery Included
This product contains a battery for backup power. The battery must be connected during installation.
Features
- UL 924, NEC, OSHA and NFPA 101 Life Safety Code compliant
- Injection-molded, high-impact, UL94 V-0 thermoplastic construction
- 120-277 VAC operation
- Universal mounting pattern knock-out in back plate for J-box mounting
- Knock-out left/right arrows
- Test switch and charge indicator
- Innovative and easy installation in minutes
Specifications
| Dimensions (May Vary by Model) | |
| Width | 11.96" |
| Height | 7.59" |
| Depth | 1.02" |
| Weight | 5.00 lb |
What's included?
- Thin Green LED Exit Sign
- Two "EXIT" Faceplates (with optional knockout arrows)
- One Blank Faceplate
- Mounting Canopy, Installation Instructions & Hardware (Inside Unit)
- Battery (Inside Unit) - Must connect the battery after installation
Construction
The LEDT series is constructed from injection-molded, high-impact, engineering-grade, UV-stabilized, UL 94 V-0 thermoplastic. White housing is standard.
Illumination
Long-Lasting, efficient Green LEDs.
Emergency Operation
Upon failure of the normal utility power, an internal solid-state transfer switch automatically provides uninterrupted emergency operation for at least 90 minutes. The fully automatic solid-state, two-rate charger initiates recharging a discharged battery within 24 hours.
Battery - Battery Backup
The LEDT Thin Exit Sign series is designed with a maintenance-free 1.2V 1000mAh NiMH battery that provides an emergency duration of 90 minutes. Recharge time of the battery is 24 hours.
Operational Temperature
| Temperature Ratings | |
| Standard Option | 0°C to 40°C / 32°F to 104°F |
Electrical Components
Smart voltage input 120-277 VAC operation. LED display indicates AC/ON. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit.
Installation
The LEDT is suitable for surface wall, side, and top mounting via included canopy. Snap together design allows for quick and easy installation. Knock-out chevrons for customized egress signage. The LEDT exit sign can be installed in damp location areas.
Mounting Configurations Explained
View Installation Instructions
Dimensions
View Common Questions or Ask Your Own Below
Post a question and have an expert answer
Q
Aaron Wilch • 09/25/2019, 4:26:47 PM
Is the sign shipped with universal mounting capability? The description says it is shipped with one faceplate and one backplate, but the video shows it configured as a double sided sign.
A
Exit Light Co.
Yes, this unit comes with a universal mounting canopy.
Q
Bobby • 06/04/2020, 12:42:07 PM
Do you have any battery back up exit signs that are two sided? Meaning exit on both sides.
A
Exit Light Co.
This unit comes with an extra faceplate to make it double sided.
Q
Stephen Andrew Atkinson • 05/09/2023, 2:22:51 PM
Can you tell me how many watts each exit sign requires?
A
Exit Light Co.
The LEDT-G-W-BB uses 1.6 watts
Q
Karissa Hall • 08/28/2023, 2:16:39 PM
Are the battery and bulb replacable?
A
Exit Light Co.
The LEDs are not replaceable. The battery is replaceable.