2" x 100' Roll Photoluminescent Egress Tape
Base Code: PT2
Items marked FAST SHIP typically ship same day if order is placed before noon
$340.00
A simple way to add additional emergency egress signage. Meets stringent New York City safety codes (New York City Building Code Reference Standard RS 6-1 & 6-1A and Local Law 26 of 2004). Tape is highly visible, displaying a safe evacuation path in the event of emergency.
No electricity or battery required. Easily affixes to walls, handrails, columns, around door frames, and along stairways and baseboards. Non-slip, high-traction surface allows for placement on floors and stair steps. Under normal lighting conditions, highly visible. In the event of low (or absence of) lighting due to power failure the tape will "glow-in-the-dark" - must be "charged" to glow, requires exposure to 54 LUX (5-ft candles) of LED, fluorescent, metal halide or mercury vapor light illumination.
Existing tape must be removed first, using a heat gun to warm the existing material and then get an edge started or use scraper. Any residual adhesive can be removed with a commercial solvent adhesive remover.
ADA Compliant
This product is compliant with the Americans with Disabilities Act.
Photoluminescent
This product uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.
Made in the USA
This unit is made in the United States.
Features
- No electricity, no batteries
- Thin gauge polyester film
- Peel-off adhesive backing makes installation easy and low-cost
- Requires 54 LUX (5-ft candles) of LED, fluorescent, metal halide or mercury vapor light to charge material for 60 minutes
- Install indoors only
- Non-toxic and non-radioactive
- High tack tape sticks to rough surfaces
- Long life expectancy
- No future hazmat disposal needed
Specifications
| Dimensions (May Vary by Model) | |
| Width | 2" |
| Length | 100" |
| Weight | 9.00 lb |
Construction
The PT2 egress tape is made from flexible, photoluminescent polyester film coated with a permanent acrylic adhesive. Engineered to exceed requirements for emergency egress and meet the industry's most rigorous standards.
Electrical Components
The PT2 egress tape does not require any type of electrical components.
Installation
The PT2 egress tape is designed for indoor safety application such as signage in building, marine, rail, and military applications. The egress tape must be exposed to ambient lighting or natural sunlight. Fluorescent light exposure is the best and fastest charging light.
View Common Questions or Ask Your Own Below
Post a question and have an expert answer
Q
Diane Hellyer • 09/16/2019, 12:11:35 PM
Can you tell me if this tape would work with LED lighting. We have 600 Watt LED that gives off 25 Lumens.
A
Exit Light Co.
Yes, this tape does work with LED lighting.