Red Aluminum Photoluminescent Self-Adhesive 'EMERGENCY EXIT ONLY' Sign

Base Code: PTM-EMEX-AL

Items marked FAST SHIP typically ship same day if order is placed before noon

Red Aluminum Photoluminescent Self-Adhesive 'EMERGENCY EXIT ONLY' Sign
Processing...

Lead Time:
FAST SHIP

Qty
A simple way to add additional emergency egress signage. No electricity or battery required. These signs can be easily placed on any flat surface. The sign features drilled holes on each corner for mounting. The sign can be mounted using double sided tape or screws with anchors for optimal support (not included).

Under normal lighting conditions, these signs are visible. In the event of low (or absence of) lighting due to power failure the signs will "glow-in-the-dark." (Signs must be "charged" to glow, requires exposure to 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light illumination).

Constructed from Rigid aluminum, the PTM series sign is durable and rigid.
Photoluminescent Glow In the Dark Lighting

Photoluminescent
This product uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.

This unit does not require use of electricity or a battery

No Electricity
This unit doesn't require electricity or a battery.

Features

  • Emergency Egress/Safety Sign
  • Aluminum frame
  • No power or wiring required
  • Requires continued exposure to at least 54 LUX illumination
  • Indoor use only
  • No future hazmat disposal needed
  • Not UL Approved

Specifications

Dimensions (May Vary by Model)
Height7"
Depth0.625"
Length12"
Weight2.00 lb
Red Aluminum Photoluminescent Self-Adhesive 'EMERGENCY EXIT ONLY' Sign Dimensions

Construction

The PTM series exit sign is constructed with non-toxic, non-radioactive material. Made from strong rigid aluminum frame.

Illumination

Under normal lighting conditions, these signs are highly visible. In the event of low or no lighting due to power failure, the lettering on the signs will "Glow in the Dark". (Signs must be "charged" to glow -- requires 54 LUX (5ft candles) of fluorescent, metal halide or mercury vapor light illumination for 60 minutes).

Emergency Operation

Upon failure of the normal utility power, this unit will provide at least 90 minutes of illumination. *This sign must be charged for a minimum of 60 minutes prior to being fully operational.

Battery - Battery Backup

The PTM series exit sign does not require any type of battery to operate; it is 100% power-free.

Installation

The PTM series sign features drilled holes on each corner for mounting. The sign can be mounted using double sided tape or screws with anchors for optimal support (not included).

Mounting Configurations   Mounting Configurations Explained


No Questions asked yet!
Post a question and have an expert answer